location_pin Get Directions
10909 Rt 144 St. Leonard NB E7E 2S6
Office: (506) 824-6002
   Cell: (506) 423-2085
    Fax: (506) 423-6010
ID # 14320065

Brush Wolf 7200 HF – High Flow

Videos
Call for Price
Overview

The 7200 High Flow Brush Wolf  model draws from all your skid steer has to offer. The auxiliary hydraulic flow required for high flow is between 26 – 40 gallons per minute. All high flow models include a case drain to relieve excess pressure build-up and protect hydraulic motor life. The suction and long-lasting high tempered steel blades blast through brush and saplings up to 6″. The balanced stump jumper prevents vibration, and a welded collar on the bottom of the deck helps prevent weeds and wire from damaging the gearbox. Galvanized 5/16″ safety chains on the front and rear protect against flying debris and aid in mulching. The front chains are replaceable. The solid one piece of formed 1/4″ steel deck will stand up to your workload for years to come. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment.  Three year warranty on the structural steel

Each Brush Wolf model is paired with the correct hydraulic motor and right angle gearbox to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter you’d prefer, which should be slightly wider than your loaders wheel base. The auxiliary hydraulic flow required for the High Flow model is between 26 – 40 gallons per minute. You’ll find the right Brush Wolf model to make the most of your skid steers power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future.

All models are designed, fabricated, powder coated, assembled and tested in Crosslake, Minnesota. Each Brush Wolf model comes standard with hoses, couplers and gearbox seal guard. Experience the power, performance and reliability from Brush Wolf products. Designed to exceed your expectations.

Available Colors

Flat Black

Yellow

Specifications
Model
7200 HF – High Flow
Category Name
Agriculture
Year
2019
Sale Type
New
Manufacturer
Cross Tech
Operating Equipment
Skid Steer Loader
Cutting Width
72''
Auxiliary Hydraulic Flow
26-40 GPM
Max Cutting Capacity
6''
Weight
1,224 lbs
Overall Length
84.250''
Overall Width
73.750''
Deck Thickness
250''
Blades
(2) .500'' x 4.000'' (High Strength, Updraft)
Blade Carrier Type
1.000'' Bar Welded to .313'' Spun Formed Pan
Blade Rotation
Counter Clockwise
Motor Protection
Pressure Reliefs
Operating PSI Cont /Int
3000/4100
Optional Blades
(4) 0.62'' x 5.188'' (High Strength, Flat)
Hydraulic Hose With Protective Wrap
Standard 78'' - Custom lengths available upon request
Use
Heavy Duty – clearing of up to 4'' diameter brush
Motor/Gearbox Coupler
Machined Steel
Drive Protection
GRD-2 Bolt (Shear Bolt)
Videos

Videos

Documents