location_pin Get Directions
10909 Rt 144 St. Leonard NB E7E 2S6
Office: (506) 824-6002
   Cell: (506) 423-2085
    Fax: (506) 423-6010
ID # 14320073

Brush Wolf 7800 HF – High Flow

Videos
Call for Price
Overview

The 7800 High Flow Brush Wolf model draws all your skid steer has to offer. The auxiliary hydraulic flow required for high flow is between 26 – 40 gallons per minute. All high flow models include a case drain to relieve excess pressure build-up and protect hydraulic motor life. The long-lasting high tempered steel blades will blast through brush and saplings up to 6″. Front and rear chains aid in mulching and reduction of flying debris. The front chains are replaceable. The solid one piece of formed 1/4″ steel deck will stand up to your workload for years to come. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment.  Three year warranty on the structural steel.

 

Each model is paired with the correct hydraulic motor and right angle gearbox to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter, which should be slightly wider than your loaders wheel base. You’ll find the right Brush Wolf model to make the most of your skid steer power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future.

All models are designed, fabricated, powder coated, assembled and tested in Crosslake, Minnesota. Each model comes standard with hoses, couplers and a gearbox seal guard included. Experience the power, performance and reliability from Brush Wolf products. Designed to exceed your expectations.All models are designed, fabricated, powder coated, assembled and tested in Crosslake, Minnesota. Each model comes standard with hoses, couplers and gearbox seal guard included. Experience the power, performance and reliability from Brush Wolf products. Designed to exceed your expectations.

Available Colors

Flat Black

Yellow

Specifications
Model
7800 HF – High Flow
Category Name
Agriculture
Year
2019
Sale Type
New
Manufacturer
Cross Tech
Operating Equipment
Skid Steer Loader
Cutting Width
78''
Auxiliary Hydraulic Flow
26-40 GPM
Max Cutting Capacity
6''
Weight
1,318 lbs
Overall Length
90.25
Overall Width
79.75
Deck Thickness
250''
Blades
(2) .500'' x 4.000'' (High Strength, Updraft)
Blade Carrier Type
1.000'' Bar Welded to .313'' Spun Formed Pan
Blade Rotation
Counter Clockwise
Motor Protection
Pressure Reliefs
Operating PSI Cont /Int
3000/4100
Optional Blades
(4) 0.62'' x 5.188'' (High Strength, Flat)
Hydraulic Hose With Protective Wrap
Standard 78'' - Custom lengths available upon request
Use
Heavy Duty – clearing of up to 4'' diameter brush
Motor/Gearbox Coupler
Machined Steel
Drive Protection
GRD-2 Bolt (Shear Bolt)
Videos

Videos

Documents